ACTi Camera Firmware V.5.12.12 - Manual (Page 81)

www.acti.com
Firmware User ’s Manual V5.12.12
81
That Unmount function is used when the camera is to be shut down for maintenance or when the
mass storage has to be physically removed for some reason. The purpose of unmounting is to
protect the currently processed data on mass storage at the moment of removal of the storage. If
the local storage is being used by camera and some videos or snapshots are being recorded to
the disk, then the sudden shutdown or removal of the disk without unmounting may corrupt the
file that currently being used by the camera. The rest of the files are not influenced in any way.
Please note that “Save&Reboot” function of the camera also does unmounting automatically for
the user.
Mount Failure
If the inserted disk ’s file system is not EXT3, then the Mounting would fail, as follows.