Utilities – ACTi Camera Firmware V.5.12.12 User Manual

Page 80

Firmware User

’s Manual V5.12.12

Utilities

The

“Utilities” are responsible for managing the storage itself rather than the files on the storage.

There are three utilities

– Mount, Format and Scan.

Mount

When the Mount storage media button shows

“Mount” button then it means that the mass storage

has been inserted to the camera, but the connection between camera and the storage has not

been established yet. By pressing the

“Mount” button, the storage becomes active. It is then

possible to check the Status of the disk, write or read data on the disk, remotely access the

storage by Web Configurator or FTP client, etc.

When pressing the

“Mount” button, the mounting process will start.

Unmount

Once the drive has been mounted, it can later be unmounted by pressing

“Unmount” button, if

necessary.