ACTi Camera Firmware V.5.12.12 - Manual (Page 55)

www.acti.com
Firmware User ’s Manual V5.12.12
55
Day / Night
This section concerns the day and night switch timing for your camera.
1. Day / Night Mode: The camera will change between day and night modes by default. You
may command camera to stay in day or night mode here, or allow it to change automatically.
2. Switch from Day mode to Night mode: This value controls the level of light where camera
switches into night mode. Increasing it will make camera switch to night mode at a darker
illumination level.
Click the [Apply] button to confirm the settings or click the [Reset] button to re-enter the
parameters.