ACTi Camera Firmware V.5.12.12 - Manual (Page 79)

www.acti.com
Firmware User ’s Manual V5.12.12
79
Status
When the mass storage has not been formatted or mounted yet, the camera would not know the
status of the storage, and the output would be as follows:
If the mass storage has been formatted or mounted already, the Status page will show the details
of the storage:
In case of IP cameras with MicroSDHC, the Storage Media Type will show “Micro SD”.
In case of video encoder with 2.5 ” SATA hard disk, the Storage Media Type would show “HDD”.
The capacity of the disk is shown in Gigabytes.
The file system is Linux based EXT3, which is different from Windows based PC file systems. If
you remove the storage from the camera and plug it directly to Windows based PC, it may not be
able to read its content. The chapter File Management explains the correct ways of accessing
files of the local storage.