ACTi Camera Firmware V.5.12.12 - Manual (Page 30)

www.acti.com
Firmware User ’s Manual V5.12.12
30
SNMP Setting
Click the SNMP Setting item to display the SNMP setting Page
Click to enable SNMP function.
Select to use SNMP V1/V2 or to use SNMP V3
Check the check box to enable traps
Enter the Destination IP address in
Enter the Trap Community used in
Select the Available trap in
Click the [Apply] button to confirm the settings or click the [Reset] button to
re-enter the parameters.