ACTi Camera Firmware V.5.12.12 - Manual (Page 33)

www.acti.com
Firmware User ’s Manual V5.12.12
33
IP Settings
Connection Type
Click the [Connection Type] item to display the “Connection Type Page”. Refer to the table below
for how to configure each setting.
Parameters Description
Dynamic IP
address
Click this to enable IP device’s DHCP function.
It will acquire its WAN port IP address from a DHCP server within the
same network. (You must have a DHCP server in order to enable this
function.)
Use host
name
Enter the host name to display in utility tools, ex IP Utility.
Static IP
address
Click this to manually enter the IP address.
IP address : Enter the WAN port IP address.
Subnet mask : Enter the subnet mask of WAN port. If IP address
is changed, adjust the subnet mask accordingly.
ISP gateway : Enter the IP address of the gateway (the router).