ACTi Camera Firmware V.5.12.12 - Manual (Page 27)

www.acti.com
Firmware User ’s Manual V5.12.12
27
ToS
Click the [ToS] (Type of Service) item to display the “Type of Service” page. Refer to the table
below for how to configure each setting.
Parameters Description
Enabled
Select whether to enable or disable the “Type of Service” (ToS)
function. This function defines the priorities of how the data from
the camera is handled by the routers that support the ToS
concept.
ToS Priority
By default, the ToS priority is set as “Normal Service”. Other
priority options are:
1. Minimize Delay
2. Maximize throughout
3. Maximize Reliability
4. Normal Service
Click the [Apply] button to confirm the settings or click the [Reset] button to re-enter the
parameters.