ACTi Camera Firmware V.5.12.12 User Manual

Page 93

Firmware User

’s Manual V5.12.12

Make sure to

have the rule “Enabled” by filling the checkbox.

By the example above, the camera will be 24/7 on guard to watch for motion events. When

motion detection region 1 detects intrusion, it will trigger the response of uploading

“image 1”

according to the parameters defined under

“Event Configuration” earlier. In other words,

whenever motion occurs, the camera will record 3 seconds of video before the moment of motion

detection, and 57 seconds after that. The video file can then be found under

“Local Storage” ->

“File Management”.