ACTi Camera Firmware V.5.12.12 - Manual (Page 20)

www.acti.com
Firmware User ’s Manual V5.12.12
20
Host
Click the [Host] to enter Host settings page. Refer to the table below for how to configure each
setting.
Parameters Description
Host name
Enter a host name, and this host name will be shown when you
use the IP utility or the SDK to search for the IP device.
Language
Select the language of default user-interface. Each user login
will see the default user-interface first.
Camera name The camera name is reserved for customer use.
Click the [Apply] button to confirm the settings or click the [Reset] button to re-enter
the parameters.
For cameras with serial port interface (like RS-232, RS-485, RS-422), the “Serial Setting” also
appears on the Host page.
Parameters Description
Serial Port Control Select the control value of corresponding serial port.
Serial Port Baud Rate Select the Baud Rate of serial port.
Click the [Apply] button to confirm the settings or click the [Reset] button to re-enter
the parameters