Network section, Ip address filtering – ACTi Camera Firmware V.5.12.12 User Manual

Page 23

Firmware User

’s Manual V5.12.12

Network Section

Click the

[Network] item

on the “Setup Page”.

IP Address Filtering

Click the [IP Address Filter] item to display the

“IP Address Filtering Page”. Refer to the table

below for how to configure each setting.

WARNING:

Please be very careful when using this function, as you may lose access

to your camera if you make mistakes in setup. You may either accidentally deny

yourself access, or forgot to include your own IP address in the allowed address list.

You will need to perform hard reset to be able to access the device again.