Firmware upload – ACTi Camera Firmware V.5.12.12 User Manual
Page 100
Firmware User
’s Manual V5.12.12
Firmware Upload
Click the [Firmware Upload] item to display the
“Firmware Upgrade Page”. Upgrade the IP
device
’s firmware through this page with the following instructions. You may upgrade firmware for
individual cameras with this function. To upgrade camera firmware in batches, please use IP
utility, which can be freely downloaded from website. The firmware file you download from
website will contain one .upg file, and one .md5 file. Uploading firmware through Web
Configurator uses only the .upg file. You will need both files if you are doing multiple upgrades
with IP Utility.
Click the
[Apply] button. The ‘’Firmware Upgrade Page-2” will be displayed as below.
Click [Browse] to select the upgrade image file. You can always get the latest version at our
website. Click the [Apply] button to start upgrade.
The upgrade process window will show a progress bar indicating upgrade status.
Once the process is finished, you will get an
“OK” message and system will reboot itself.
NOTE:
If you cancel the firmware upgrade during upgrade process, the browser window
will be closed