ACTi Camera Firmware V.5.12.12 User Manual

Page 54

Firmware User

’s Manual V5.12.12

3D Noise Reduction:

Select ON or OFF to enable or disable this function. Enable this for

smooth and clear image. Disable this if your scene contains many extreme details that may

be smoothed over with 3DNR.

Edge Enhancement:

Select the Edge Enhancement value. The higher the value, the

sharper the image.

Advanced WDR:

Select the WDR level. Options are: Disabled, Low, Medium, High, Highest.

NOTE:

Advanced WDR is disabled and will not appear on screen if “Exposure Mode” is set to

“Manual”, see

on page 56.

10.

Defogging:

Select the Defogging value. The higher the value, the clearer of image in foggy

situation. If you want to disable this function, please choose value 0.

11.

Restore image settings to default:

When press this button, it will use the default image

settings.

Click the [Apply] button to confirm the settings or click the [Reset] button to re-enter the

parameters.