Wakeup – Welltech SIPPBX 6200 V.3.1.0 User Manual
Page 94

Welltech Computer Co., Ltd.
• Disable Conference Call: Disallow to call a conference call
• Server Transfer: The server will do the transfer instead of send to CPE. It is
recommended to use it only when CPE doesn’t support call transfer features.
It is only happened when the user is transferred party.
Security
• Disable Un-Register All: Disable Un-Register all
• Disable RADIUS Billing Send: Disable RADIUS Billing Send
• Reject Anonymous Call: Reject the anonymous incoming call or not
Misc
• Sync to Address: Set SIP to header.
• Response to Sending Port: Response to CPE sending port instead of public
contact port.
• Response to Top Via: Response SIP message to the top via IP address and
port.
• CTI: Computer Telephony Integration (reserved item) Internal use only
• Auto Subscriber for MWI: Automatically subscriber MWI service to MWI server
when the user is registered.
• Disable Qop: Disable sending qop tag in SIP 401 and 407 authentication
header.
• Auto Subscriber for Presence: Automatically subscriber Presence service to
Presence Server when the user is registered.
• Register Event Log: The system will trigger a system event when the
subscriber is registered and unregistered. For a predefine user, the system will
also fire a system event when the predefined user is no response and
responding.
• Secretary: The secretary service. All the calls dial to the leader must be
answered by the secretary. And then the secretary will judge whether the call
should be transfer to the leader. This will avoid disturbing unnecessarily.
Parameter Button
• Copy: Copy service setting from a subscriber
• Mask: Set the subscriber visual view of the service. If you uncheck the mask of
a service, the subscriber login will not able to see it.
Wakeup:
Click the Extension > Wakeup to modify one time/countdown wakeup call for the
selected user.Select the wakeup call type and parameters for the extension here.
Figure 6.12-4
SIPPBX 6200S/GS Release 3.1.0 User Guide
- 94 -