Welltech SIPPBX 6200 V.3.1.0 User Manual
Page 92

Welltech Computer Co., Ltd.
Figure 6.12-3
Parameter Description:
Forward Service:
• Forward Subscriber Only: Forward to PBX user only. When it is enabled, the
forward target will only allow extension only, not PSTN.
• No Answer Forward: Forward to the URI when the subscriber has no answer.
• Unconditional: When enabled, any calls to this subscriber will be forward to
this URI unconditionally. You can use SIP URI or subscriber ID here.
• Busy Forward: Forward to the URI when the subscriber is busy. You can use
SIP URI or subscriber ID here. You can use SIP URI or subscriber ID here
• Unavailable
Forward:
Forward to the URI when the subscriber is unavailable
(not registered). You can use SIP URI or subscriber ID here. You can use SIP
URI or subscriber ID here
• 181 for Call Forward: Send 181 for Call Forward
• Announcement before Forward: The system will play announcement before
forward the call to new number.
• Find Me: Locate subscriber based on different time segment when the original
(registered) contact cannot be reached.
- Find Me Hunting First: Hunting find me contact first.
- Hunting Subscriber: Applicable only for Find Me hunting checked will hunt
subscriber registered contact when find me can’t be reached.
• Number Change: Change the original number to a new number. When enable
this feature, the system will play announcement for the changed number.
SIPPBX 6200S/GS Release 3.1.0 User Guide
- 92 -