Welltech SIPPBX 6200 V.3.1.0 - Manual (Page 89)

Welltech Computer Co., Ltd.
• DNIS Screening Group: DNIS screening group
• Call Authorization Mode: Send authorization to Radius server or not
- None: None
- Radius: Send to RADIUS for call permission
• Emergency Group: Emergency call group
• Caller ID Mode: Displace caller ID or not
- Inhibit: Hide the called party number
- Transparent: Pass through the caller ID
• Device Type: Subscriber device type
- Subscriber: Subscriber user
- Softphone: It is Welltech soft-phone device type. Welltech SP-365 is
required as the soft-phone.
• Hunting Method: Call forking method
- Sequential: Call hunting each contact in sequence
- Parallel (answer): Send multiple call invites to multiple contacts
simultaneously. When a user pickup the phone, disconnect others
contacts.
• Preferred RTP Group: Preferred RTP resource server group to be used
• Register Type: Subscriber register type
- Dynamic: Subscriber need send register message for availability
- Predefine: Subscriber will be handle as a permanent user
 Predefine URI1: Predefine subscriber URI1 (i.e.
sip:[email protected])
 Predefine URI2: Predefine subscriber URI2 (i.e.
sip:[email protected])
- Predefine/NAT: Subscriber will be handled as a permanent NAT user
(manual IP/Port mapping is required)
 Predefine URI 1: Predefine NAT subscriber URI (i.e.
sip:[email protected]: 7777)
 Public TA: mapped NAT Server IP address and port (i.e.
61.218.42.217:5060)
- LCS Dynamic: This is used only when the subscriber type is a regular
subscriber and also a LCS user. You can use IP phone or CPE to register
this account and also it will ring the LCS communicator client software
simultaneously.
• RTP Proxy: Use RTP Proxy or not
- Yes: Always use the RTP Proxying
- No: Always not use RTP Proxying
- Auto: Automatic decide to use RTP Proxying or not (recommended)
- Recorder: The subscriber is required voice recording
- Recording on Demand: Use Recorder on demand service (WellRec 5600 is
required)
- Auto (n-NAT): This is only used when you have a NAT box behind a NAT
box. It is mainly for testing or a special environment.
SIPPBX 6200S/GS Release 3.1.0 User Guide - 89 -