Welltech SIPPBX 6200 V.3.1.0 - Manual (Page 32)

Welltech Computer Co., Ltd.
SIPPBX 6200S/GS Release 3.1.0 User Guide - 32 -
to call out to PSTN world.
Start Path: Home > PSTN Gateway Setup Wizard
Step 1: Here you can setup the basic parameters such as register number,
telephone etc for the selected PSTN gateway.
Figure 3.5-1
Parameter Description:
• New or Modify: New or modify a gateway
• Belonged Office: Belonged office ID
• Register Number: Register TEL no or user account
• Register User Password: Register user password (device password only)
• Register Type: Subscriber register type
- Dynamic: Subscriber need send register message for availability
- Predefine: Subscriber will be handle as a permanent user
 Predefine URI1: Predefine subscriber URI1 (i.e.
sip:[email protected])
 Predefine URI2: Predefine subscriber URI2 (i.e.
sip:[email protected])
- Predefine/NAT: Subscriber will be handled as a permanent NAT user
(manual IP/Port mapping is required)
 Predefine URI 1: Predefine NAT subscriber URI (i.e.
sip:[email protected]: 7777)
 Public TA: mapped NAT Server IP address and port (i.e.
61.218.42.217:5060)
- LCS Dynamic: This is used only when the subscriber type is a regular
subscriber and also a LCS user. You can use IP phone or CPE to