Welltech SIPPBX 6200 V.3.1.0 - Manual (Page 206)

Welltech Computer Co., Ltd.
SIPPBX 6200S/GS Release 3.1.0 User Guide - 206 -
for SIPPBX 6200 to call the extension to wakeup the user, when the time
exceeds the defined time here, the SIPPBX 6200 will not call the extension.
• Max Retry Count: The max retry times when the extension which will be
waked is busy
• Retry Interval (secs): The interval for SIPPBX 6200 to retry the extension
when it is unreachable.
• Wakeup Call Prompt Language: The default prompt language for the user
listened
• Max Operation Timeout (secs): The maximum operation time in seconds.
The SIPPBX 6200 will disconnect the wakeup call automatically if the
extension is not hung up and when the Wakeup Greeting Report Count is
set to Repeat Forever.
• No Answer Timeout (secs): The maximum ringing time when no person
answers the wakeup call
• Wakeup Greeting Repeat Count: The wakeup greeting broadcast times
when the extension is not hung up. If you set the count is 3, then the
SIPPBX 6200 will announce the wakeup greeting 3 times and disconnect
the operation automatically.
- Repeat Forever: The SIPPBX 6200 will announce the wakeup greeting
until the called party hang up the call or reach the max operation time.
Step 3: Enable the Wakeup Call and Test
3.1 Enable or disable it through Web Browser (IE 6 or above
only)
Login the SIPPBX 6200 (system administrator or extension user) and click
Wake Call to set it up.
Select the wakeup call type and parameters for the extension as follows:
Figure 6.12-4
Parameter Description:
• One Time Wakeup Call: The wakeup call only work one time. For example:
you set a wakeup call to 8:00am in the 10:00am, and then the wakeup call
will ring tomorrow 8:00am.
• Wakeup Time (hh:mm): Set the wakeup time here. The format is hh:mm.