Welltech SIPPBX 6200 V.3.1.0 User Manual
Page 93
Welltech Computer Co., Ltd.
• Auto Call Forward: Auto call forward to the changed number or not after
number changed.
Call Pickup:
• Group Pickup (Picked): Allowed to be picked-up within group or not
• Global Pickup (Picked): Allowed to be picked-up globally or not
Personal Screening Service:
• Personal ANI Screening: Personal ANI screening can be used to filter the
caller based on caller ID. For all TEL are set to allow (full match), only on-list
ANI can get through. For all TEL are set to disallow, only on-list ANI will be
screened. Otherwise, “disallow” has higher priority than “allow”.
• Personal DNIS Screening: Personal DNIS screening can be used to limit the
called prefix. For all TEL are set to allow (prefix match), only on-list DNIS can
get through. For all TEL are set to disallow, only on-list DNIS will be screened.
Otherwise, “disallow” has higher priority than “allow”
• Do Not Disturb: Up-to 2 time segments can be set to reject all incoming calls.
VAD Service (Value Added Service)
• Coloring Ring Back Tone: Coloring Ring Back Tone service
• VMS: Voice Mail Service
• Server Hold Tone: Enable Server Hold Tone or not. When you enable it, the
SIPPBX will play the hold tone music instead of CPE device play the hold
tone.
• Announcement Service: Enable the announcement service or not. Normally,
you don’t need enable it since in office will enable voice mail service.
Subscriber Service
• ANI Replacement: Replace calling number for Gateway or all subscriber
- Replace ANI: Replace calling number. It is used to integrate PSTN number
into VOIP number. Thus the receiver will get the corresponding PSTN
number for call back. To use this function, normally need PSTN provider’s
permission to send the caller ID.
- Replace Type: Whether to replace the calling number when send the call to
gateway only or not.
- PSTN Number: This number will be handled as a PSTN number. It will
work like you have a second number in SIPPBX 6200. 6200 will look at the
PSTN number first.
• Short Code: short code to be used within same group
• Display Name: Change SIP display name to the set name.
• Disable call forward display name: Add display name as subscriber id in SIP
from header when call forward caller mode is "forwarder".
• Support Video: Enable to support video or not. If not, video SDP will be set to
disable.
• Missed Call: Missed call notify service
• Disable Call Waiting: Disable call waiting feature. When disable call waiting
features, the second incoming call to the user will be rejected by 6200.
SIPPBX 6200S/GS Release 3.1.0 User Guide
- 93 -