Welltech SIPPBX 6200 V.3.1.0 - Manual (Page 76)

Welltech Computer Co., Ltd.
SIPPBX 6200S/GS Release 3.1.0 User Guide - 76 -
• Language ID: Language ID
• Language:
Language
• TTS: Enable the TTS or not. When you enable the TTS, the 6200 will try to
load corresponding TTS0?.zip. If it is failed, 6200 will use English for TTS.
Call Flow Editor please refer to Chapter 7 Call Flow Editor
Wakeup Call
The SIPPBX 6200 can call the extension to wakeup the user. Please refer
Appendix 7 Step by Step example for Wakeup Call
Here you can set the wakeup call parameters.
Start Path: Enhance Service > Config > Wakeup Call
Figure 6.9-1
Parameter Description:
• Wakeup Call Prefix: Wakeup call service prefix code
• Max Tolerance Time (mins): Used to indicate the maximum tolerance time
for SIPPBX 6200 to call the extension to wakeup the user, when the time
exceeds the defined time here, the SIPPBX 6200 will not call the extension.
• Max Retry Count: The max retry times when the extension which will be
waked is busy
• Retry Interval (secs): The interval for SIPPBX 6200 to retry the extension
when it is unreachable.
• Wakeup Call Prompt Language: The default prompt language for the user
listened
• Max Operation Timeout (secs): The maximum operation time in seconds.
The SIPPBX 6200 will disconnect the wakeup call automatically if the
extension is not hung up and when the Wakeup Greeting Report Count is
set to Repeat Forever.