Welltech SIPPBX 6200 V.3.1.0 - Manual (Page 47)

Welltech Computer Co., Ltd.
SIPPBX 6200S/GS Release 3.1.0 User Guide - 47 -
• TCP Port: The local TCP port
• Trust Provisional IP: Trust provisional IP or not
• Auth Mode: Enable log in request or not
• Login Prompt: Login prompt
• Password Prompt: Password prompt
• CDR Format: CDR format. Please refer to Appendix 1 CDR Format
• Max CDR File Keep Days: The maximum CDR system keeping days
• CDR Send Delay (ms): The delay time of send CDR
• Output Mode: The output mode for the CDR. If you need to connect to
External Enterprise Billing system, it is required to have TCP enabled.
• Send Zero Session Time: Enable send zero duration CDR or not. If it is
enabled, the unconnected call will be write to CDR.
• Send Billing Start: Whether to send a start CDR to external CDR server or
not when the call is connected.
• CDR Report: Enable or disable CDR Report. When enable the CDR
reporting, each call will be recorded for reporting purpose. If you are using
the external billing software, it is recommend to not turn it on.
• CDR Report Time Format: The date time format of CDR report. Supported
format show as below,
"mm.dd.yy hh:mm:ss"
"mm/dd/yy hh:mm:ss"
"mm-dd-yy hh:mm:ss"
"mm.dd.yyyy hh:mm:ss"
"mm/dd/yyyy hh:mm:ss"
"mm-dd-yyyy hh:mm:ss"
"yyyy.mm.dd hh:mm:ss"
"yyyy/mm/dd hh:mm:ss"
"yyyy-mm-dd hh:mm:ss"
• Max CDR Report Raw Data Keep Days: The maximum keep days for the
CDR report raw data
• Toll Restriction: Enable or disable the Toll Restriction Service or not. After
enable toll restriction, the administrator will able to restrict each extension’s
call by called prefix or calling time.
• Inter-Subscriber Billing: Enable Billing Report to include Extension to
Extension calls or not.