Chapter 10 telnet & rs-232 configuration – Welltech SIPPBX 6200 V.3.1.0 User Manual
Page 167

Welltech Computer Co., Ltd.
SIPPBX 6200S/GS Release 3.1.0 User Guide
- 167 -
Chapter 10 Telnet & RS-232 Configuration
SIPPBX 6200 also can support to be managed by Telnet or Console
port (RS-232) for basic operations.
Interface:
Network: TCP/IP Telnet (i.e. telnet 192.168.67.1 10086)
RS232:
- Connect using: COM1
- Baud Rate: 9600
- Data bits: 8
- Parity: None
- Stop bits: 1
- Flow Control: None
- Wire: Null modem line (crossed)
Logon SIPPBX 6200 by Telnet
Use Windows build-in Hyper Terminal or other telnet terminal emulator
to login (e.g. telnet 192.168.111.101:10086). User ID & password will be
required for login (default login user id: admin, password: admin & user id: root,
password: root).
Command List:
Command
Description
echo
Auto echo on or off
eventlog
Clean or show system log message
exit
Quit the current session
ipconfig Configure
or
show network1,2 information
ping
Check an IP address is available or not
reboot Reboot
reset Soft-reset
shutdown Shutdown
time
Reset or show system time.
timezone
Setup or show system timezone
useradmin Manage user account.
help & ?
View command list
Echo: auto echo on or not
Command Purpose
[root#]echo ?
Usage: echo on/off
Example: echo on
[root#]echo on
Echo is on
[root#]echo off
Echo is off (default ralue)
Eventlog: show system log message