Welltech SIPPBX 6200 V.3.1.0 - Manual (Page 71)

Welltech Computer Co., Ltd.
SIPPBX 6200S/GS Release 3.1.0 User Guide - 71 -
• VMS Access Code 1: Use extension number as the VMS user to access
umber and password
is the prefix to be used for entering the
of leaving message
Busy When Come From Conference: Enable the response busy
Click the Notify button to set voice mail notice parameters as figure 6.4-2:
voice mail. No extension input is required.
• VMS Access Code 2: Will ask for extension n
authentication to access VMS.
• Leave VMS Directly Prefix: This
leaving message directly without prompt. The system will automatically
create the required prefix. The users only need to dial this prefix and
extension number for leaving the message. It is useful for operation
console to transfer the customer into a voice mail.
• Leave Message Max OP Timeout (sec): The max time
operation
• Response
when the call comes from conference or not. It is recommended to set to
enable.
Figure 6.4-2
Parameter Description:
mail notice or not
, cram MD5,login,plain or NTLM
should be
ign: Enable from address automatic assign or
• Enable Notify: Enable e
• SMTP Mail Server: SMTP Mail Server
• Auth
Mode: Authentication mode, none
• SMTP Reconnect Interval (sec): SMTP reconnect interval time
• Send Mail Max Retry: The max retry number of sending mail
• Query VMS DB Interval (sec): Query VMS DB interval time (it
greater than 120 seconds)
• From Address Automatic Ass