Welltech SIPPBX 6200 V.3.1.0 - Manual (Page 66)

Welltech Computer Co., Ltd.
SIPPBX 6200S/GS Release 3.1.0 User Guide - 66 -
used. 6200 will initiate all calls out-to broadcasted number. It is required to
have the specified CPE device to understand the broadcasting server
request. SIPPBX 6200 can allow having up-to 16 parties of current
broadcasting target for 6200s and 30 parties for 6200. The system wide
total broadcasting target is same as DSP channel license.
• Server Broadcast Max Time: The max broadcasting time in second for a
broadcasting request. When exceeding the max broadcast time, 6200 will
disconnect the calls.
• Server Broadcast No Answer Timeout: The default maximum time (in
second) to wait the broadcasted party pick up the phone.
Summation of (Reserved Auto Attendant + Reserved VMS Retrieve +
Reserved Conference + Reserved Wakeup Call) cannot exceed the limitation
of DSP resource. If it is smaller than max DSP resource, the rest of DSP
resource will be dynamically allocated by required service.
• Reject Any Call from Enhance Service: Reject the call from Enhance
Service itself. It is recommended to be “enable”.
• Service Setting IVR Prefix: The prefix of the service setting IVR. The
Service Setting IVR allowed extension changed service without complex
service code. The user can dialing into the service setting IVR prefix and
the IVR will guide it through voice for service settings.
• Service Setting Max Operation Timeout: The max time of service setting
operation.
• Service Setting Default Language: The default language of service setting
IVR prompt
• Reserved Service Setting Channel: The reserved channels for service
setting IVR
Interface
Start Path: Enhance Service > Config > Interface