Welltech SIPPBX 6200 V.3.1.0 User Manual
Page 100
Welltech Computer Co., Ltd.
number for call back. To use this function, normally need PSTN provider’s
permission to send the caller ID.
- Replace Type: Whether to replace the calling number when send the call to
gateway only or not.
- PSTN Number: This number will be handled as a PSTN number. It will
work like you have a second number in SIPPBX 6200. 6200 will look at the
PSTN number first.
• Display Name: Change SIP display name to the set name.
• Server Transfer: The server will do the transfer instead of send to CPE. It is
recommended to use it only when CPE doesn’t support call transfer features.
It is only happened when the user is transferred party.
Security
• Disable Un-Register All: Disable Un-Register all
• Disable RADIUS Billing Send: Disable RADIUS Billing Send
• Trust Network: Show the trunk the real caller number. When the user uses the
anonymous method, if the SIPPBX 6200 is enable the Trust Network, the trunk
will know the real caller but will hide the real caller number for the called part.
This will enhance the security.
Misc
• Sync to Address: Set SIP to header.
• Response to Sending Port: Response to CPE sending port instead of public
contact port.
• Response to Top Via: Response SIP message to the top via IP address and
port.
• CTI: Computer Telephony Integration (reserved item) Internal use only
• Disable Qop: Disable sending qop tag in SIP 401 and 407 authentication
header.
• Register Event Log: The system will trigger a system event when the
subscriber is registered and unregistered. For a predefine user, the system will
also fire a system event when the predefined user is no response and
responding.
IXC Service (Internet Exchange Center Service)
Incoming Call
• Matched Prefix: The SIPPBX 6200 will ask to add this prefix for every call
dialed to the trunk.
• Disable Remove Prefix: the SIPPBX 6200 will not allow removing the added
prefix
Outgoing Call
• Outgoing Added Prefix: The SIPPBX 6200 will add this prefix for all calls dialed
out from the trunk
Parameter Button
• Copy: Copy service setting from a subscriber
• Mask: Set the subscriber visual view of the service. If you uncheck the mask of
SIPPBX 6200S/GS Release 3.1.0 User Guide
- 100 -