Welltech SIPPBX 6200 V.3.1.0 - Manual (Page 154)

Welltech Computer Co., Ltd.
SIPPBX 6200S/GS Release 3.1.0 User Guide - 154 -
**
If the system is configured as “voice gateway” mode, don’t forget to connect
both Ethernet port during the startup. Otherwise, the system will not in service.

Note: 1. Routing Table only available when you turn the Voice Gateway
mode on.
2. Network control takes around 5-second to apply the new
network configuration. Please logon again with new IP
address after 5 seconds.
SNMP
Start path:
Control > SNMP > Community
Figure 8.4-1
Parameter Description:
• Community Name: Community name for network manager system
accessing
• Access Rights: Giving access right to the community
Start path:
Control > SNMP > Trap
Figure 8.4-2
Parameter Description:
• Trap Community: Trap community name for NMS
• Trap Host: Trap host IP address
Note: It takes around 1-minute to update SNMP configuration and
display successful message.
DHCP
SIPPBX 6200 provides a dedicate DHCP server for auto configurable
device (LP600N). It is recommended to use VLAN tag to separate the voice
and data network.
Start path:
Control > DHCP