Welltech SIPPBX 6200 V.3.1.0 - Manual (Page 49)

Welltech Computer Co., Ltd.
SIPPBX 6200S/GS Release 3.1.0 User Guide - 49 -
• Vendor ID: RADIUS vender attribute’s vender ID.(Default is 9)
• Send Zero Session Time:
- Yes: Send 0-balance session time for RADIUS when the call failed
- No:
no
• Welltech extend RADIUS attrib: Enable the Welltech extended RADIUS
attributes or not. Please only enable this extended attributes when your
WellBilling 6600 is Release 2.0 and you need use Least Cost Routing or
RADIUS routing features.
• Billing Message: Send RADIUS billing message out
• Inter-Subscriber
RADIUS Authentication:
- Yes: When a subscriber is calling another subscriber, SIPPBX 6200 will
send RADIUS for call permission
- No: When a subscriber calling another subscriber, SIPPBX 6200 will
not send RADIUS for call permission
• CDR Report: Enable or disable CDR Report. When enable the CDR
reporting, each call will be recorded for reporting purpose. If you are using
the external billing software, it is recommend to not turn it on.
• CDR Report Time Format: The date time format of CDR report. Supported
format show as below,
"mm.dd.yy hh:mm:ss"
"mm/dd/yy hh:mm:ss"
"mm-dd-yy hh:mm:ss"
"mm.dd.yyyy hh:mm:ss"
"mm/dd/yyyy hh:mm:ss"
"mm-dd-yyyy hh:mm:ss"
"yyyy.mm.dd hh:mm:ss"
"yyyy/mm/dd hh:mm:ss"
"yyyy-mm-dd hh:mm:ss"
• Max CDR Report Raw Data Keep Days: The maximum keep days for the
CDR report raw data
HTTPS Certificate
Secure Hypertext Transfer Protocol Certificate, it can enhance the web
page security. The user can put their owned HTTPS SSL certificate here.
Start Path: System Core > HTTPS Certificate