Sip trunk setup wizard, Runk, Etup – Welltech SIPPBX 6200 V.3.1.0 User Manual
Page 34: Izard
Welltech Computer Co., Ltd.
SIPPBX 6200S/GS Release 3.1.0 User Guide
- 34 -
Step 2:
Choose the prefix you are going to add or modify for adding or
removing the selected gateway.
Figure 3.5-2
Parameter Description:
• Add into exist call routing: Add the following prefix into the call routing
existed
• Create a new call routing: Create a new call routing for the following prefix
• Prefix Matched: Called number prefix to be matched
• TEL NO: Subscriber TEL no for route
• Priority: Used only for priority hunting.
Note:
After you create the PSTN Gateway information successfully, you will
see the corresponding record in the Gateway part and Call Routing part.
SIP Trunk Setup Wizard
Instead of you can peer to peer to connect to a SIP service provider. The
SIP service provider might give you a SIP account for register and making call.
For this kind of configuration, you need to use the SIP trunk setup here.
Start Path:
Home > SIP Trunk Setup Wizard
Step 1:
Set the SIP trunk parameters which provided by your SIP service
provider.