Welltech SIPPBX 6200 V.3.1.0 - Manual (Page 21)

Welltech Computer Co., Ltd.
SIPPBX 6200S/GS Release 3.1.0 User Guide - 21 -
• Primary DNS Server: Primary DNS Server IP network
• Secondary DNS Server: Secondary DNS Server IP network
• Host Name: Host name used to register to DNS Server
• Domain Name: Domain name used to
• Dynamic DNS Registration: Enable Dynamic DNS registration or not
LAN Interface
• IP Address: The server IP address (LAN)
• IP Netmask: The server IP netmask (LAN)
• Enable VLAN: Enable the virtual LAN or not
• VLAN ID: The VLAN ID
Note:
If you are using voice gateway mode, please make sure you have
connected both Ethernet ports.
System Setup Wizard
After completing the initial setup, you need set the basic parameters for
the server system. For example, UDP port, Enable the Encryption or not, and
so on. Here is the second step required after initial setup wizard.
Start Path: Home >System Setup Wizard
Step 1: System Setup Basic Parameters. SIPPBX 6200 can support up-to 3
UDP/TCP ports. If you are using voice gateway mode, please make
sure you have connected both Ethernet ports.
Figure 3.2-1
Parameter Description:
• SIP Domain: WellSIP Telephony SIP Proxy domain name. It’s normally
used when you have a DNS record setup for WellSIP 6500.
• Listen UDP Port , 2 and 3: The local UDP port on which the SIP service