Visara CCA-3074 Installation - Manual (Page 82)

Appendix A. CSS32 Coax Subsystem
A-12 707161-003
Page forward [PF8] to the next panel and modify the indicated fields as shown.
ASCII Session Profile 01 LINCS C8.2 Central Control
TELNET OPTIONS
Interrupt Process: 00 Abort Output: 00
Break Character: 00 Are You There: 00
Erase Character: 00 Erase Line: 00
Echo: Disable Binary: Enable
Timing Mark: Disable Status: Disable
Terminal Type: Enable End Of Record: Enable
TCP Port: 21200 TCP Port Action: Incremental
TN3270 Session: Enable TN3270E Support: Enable
ATTN Key: Telnet Interrupt Process
SYSREQ Key: Telnet Abort Output
PF: 1-Menu 3-Def_Dflt 4-Add 5-Delete 7-Back 8-Forw 9-Default 10-Done
Note that you can change the range of listen ports needed on the CCA-3074 by modifying
the TCP Port value shown. The port listed corresponds to the port used by coax port 0.
The other coax ports increment from the listed port number.
You will need to add an entry to the table found on the IP Host Classes table similar to
shown below to provide the second upstream CCA-3074 destination (210.47.56.3). You
would also make changes to this panel if you need to change the upstream default
destination of 200.200.200.1.
IP Host Classes LINCS C8.2 Central Control
ASCII Ses
Class Line IP Address or Name Profile Class Name
----- ------ -------------------------------- ------------- ----------------
01 FET1 210.48.19.34 00 CCA-3074-1
02 FET1 210.47.56.3 01 CCA-3074-2
03 None ________________________________ __ ________________
04 None ________________________________ __ ________________
05 None ________________________________ __ ________________
06 None ________________________________ __ ________________
07 None ________________________________ __ ________________
08 None ________________________________ __ ________________
09 None ________________________________ __ ________________
10 None ________________________________ __ ________________
11 None ________________________________ __ ________________
12 None ________________________________ __ ________________
13 None ________________________________ __ ________________
14 None ________________________________ __ ________________
15 None ________________________________ __ ________________
16 None ________________________________ __ ________________
PF: 1-Menu 7-Back 8-Forw 9-Default 10-Done