Visara CCA-3074 Installation - Manual (Page 49)

CCA-3074 Installation and Configuration
707161-003 4-7
Configuring Sessions
Once a CU has been defined, you may configure the individual sessions assigned to the
subchannel addresses called out by the Lowest IODEVICE Address and the Highest
IODEVICE Address, by pressing the [Subchannels] button. First select which CU you
wish to configure sessions for and select the [Subchannels] button.
The Update Subchannels panel is displayed below.
Field Definitions
Update Subchannels for CU: This dropdown allows you to select the CU that you wish
to configure the subchannels for. Note that you need to press the [Update] button to save
changes made to the currently displayed CU subchannels before displaying another CU,
or the changes will be lost.
Subchannel: This is an information only field and specifies which Subchannel is being
displayed.
ID: This field determines the name by which this resource will be referred to elsewhere
on the CCA-3074. You should select a name that is meaningful and easily recognized. A
default name will automatically be assigned by CCA-3074.