Visara CCA-3074 Installation - Manual (Page 73)

CCA-3074 Installation and Configuration
707161-003 Appendix A-3
Note that you really only need to define the ports that will actually be used. For example
if you plan to attach devices to ports 0-5 then you will only need to define listening ports
21100-21105.
Next, assign each listening port to the host session that it needs to be assigned to.
For console sessions you should always assign the port to a Host resource with a specific
LU assignment. You can optionally enter the IP address of the CSS32 unit, although this
should not be necessary if you are connecting with a crossover cable. If you are
connecting into a network hub/switch then you should enter the IP address for security
reasons.