Visara CCA-3074 Installation - Manual (Page 53)

CCA-3074 Installation and Configuration
707161-003 5-3
Button Definitions:
Return: Selecting this button will take you back to the Update Connectivity
Configuration menu.
Update: The [Update] button causes the information on the panel to update the
configuration file. You must press the [Update] button before leaving the panel if you
want the changes to be made, otherwise the changes will be discarded.
New: Pressing the [New] button changes the dropdown control into a data entry control
allowing you to define a new Host Circuit. Once you have entered the name for your new
Host Circuit and selected the CU that you wish to associate it with you will need to press
the [Update] button to save the configuration. This will change the control back to a
dropdown control that will include the newly defined Host Circuit. The [New] button
only appears if there are CUs defined for which no Host Circuits have been assigned to
them.
Delete: This button is used to delete a Host Circuit definition. Select the Host Circuit
that you wish to delete using the dropdown control, then press the [Delete] button. The
Delete function only deletes the Host Circuit, not the CU that it was assigned to.
Sessions: Selecting the [Sessions] button will cause the Configure NSNA Host Sessions
panel to appear. An example of this panel is shown below.