Visara CCA-3074 Installation - Manual (Page 27)

CCA-3074 Installation and Configuration
707161-003 2-7
Making Configuration Updates
Before making major configuration changes, if you already have a working
configuration, you may want to either make a restore point, or at least save your current
configuration, so that you can go back to it if necessary. It should be noted that most of
the configuration panels have an ‘Update’ or ‘Submit’ button on them. These are used to
save the changes that you make on that panel. Changing values on a panel, then closing
the panel (by selecting the X in the upper right corner of the window or by pressing the
Return button, without pressing the Update button first, will not save your changes, and
any modifications will be lost. Normally you will get a message to remind you to save
your changes if changes have been made, when you attempt to leave the panel. Passwords
and nickname changes will take affect immediately. Some changes, mostly related to the
TN3270 configuration can be made to take effect immediately by utilizing the [Apply]
button found on the TN3270 Configuration Menu.
Network Options Panel
Selecting the ‘Network’ option will display the following configuration options:
If the Quad Ethernet Interface card is installed you will see additional eth2-5 entries for
IP address and netmask. If a second Quad Ethernet Interface card is installed you will see
additional eth6-9 entries for IP address and netmask.
The configuration options on this panel will allow you to modify the network interface
used for management of the CCA-3074. After you have entered all of the values that you
need, then press the ‘Submit’ button. The new values will be stored and will take affect
the next time the CCA-3074 gets booted.