Visara CCA-3074 Installation - Manual (Page 11)

CCA-3074 Installation and Configuration
707161-003 1-3
Initial Installation
Installation of the CCA-3074 consists of multiple steps, and may involve more than one
person. The CCA-3074 can be locally or remotely configured. Tasks required to complete
an installation include:
1. Mounting the hardware platform (if desired) in a rack or placing the platform
within the necessary proximity of all of the network connections required to
satisfy the configuration.
2. Cabling the unit for power, ESCON, FICON, and Ethernet connections as
needed.
Locally configuring:
3.
Attach monitor, mouse, and keyboard directly to the unit.
4. Once booted, select Start>Programs>Firefox.
Remotely configuring:
3.
Editing the FEP4600.ini file if necessary to provide access to a web browser
capable platform, such as a PC, or change the IP address on a web browser
capable platform to be compatible to the CCA-3074 default address.
4. Powering up the unit with the floppy containing the FEP4600.ini file.
5. Connect to the platform with a web browser to finish the configuration.
Chassis Installation
Tools needed:
1. Phillips Screw Driver
2. Antistatic Strap
Installing Chassis Rails:
Please make sure that the chassis covers and chassis rails are installed on the chassis
before you install the chassis into the rack.
To avoid personal injury and property damage, please follow all the safety steps listed
below.
Before installing the chassis rails:
1. Enclose the chassis with chassis covers.
2. Unplug the AC power cord(s).
3. Remove all external devices and connectors.