Verilink AS2000: The Basics (880-502981-001) Product Manual - Manual (Page 34)

Site Planning
3-4 Verilink Access System 2000: The Basics
NOTE: To provide the highest level of redundancy, use a fuse panel
with redundant (A and B) fuse positions or two separate fuse
panels for the A and B power supplies.
Table 3-2 Dual-line Shelf Power Supplies
NOTE: When HDM 2180 or HDM 2182 modules are used in a Dual-
line shelf, installation of two external power supplies is
recommended. If an NCM 2000 is added to a Dual-line shelf
with an HDM 218x module, the use of two power supplies is
required.
NOTE: The PWR 2940 power supply is recommended for use only at
110 volts. The PWR 2950 power supply can be used with
voltages of 100 to 240 Vac.
Hardware
Dimensions
AS2000 shelves require a mounting surface that can support the
weight of the shelf and all associated plug–in modules. A 19–inch
(49 cm) or 23–inch (59 cm) equipment rack, cabinet, or desktop can
support the weight of Access System 2000 shelves. Multi-line,
Quint-line, and Dual-line shelves can be front or mid-mounted into
a 19– or 23–inch (49 to 58.5 cm) rack.
Table 3-3 Approximate Weight and Height in Rack
NOTE: Provide approximately 30 inches (77 cm) of clear space in
front of and behind the equipment rack for installers to
maneuver during assembling and testing.
PWR 2940 110 Vac 47 to 440 Hz 36 to 60 Vdc input
PWR 2950 100 to 220 Vac 47 to 440 Hz 100 to 240 Vac input
Item Approximate Weight Height in Rack
Multi-line Shelf 14 lb (7 kilos) empty, 36
lb (16 kilos) fully
equipped
8.75 inches (23 cm)
Quint-line Shelf 12 lb (5.5 kilos) empty,
20 lb (9.2 kilos) fully
equipped
5.25 inches (13.5 cm)
Dual-line Shelf with
power supply
10 lb (4.6 kilos), fully
equipped
1.75 inches (4.5 cm)
Desktop power supply 2 lb (0.908 kilos) 3.85 inches (9.6 cm)
Heat baffle 1.3 lb (0.504 kilos) 1.75 inches (4.5 cm)
Fan Shelf 1RU 5 lb (2.3 kilos) 1.75 inches (4.5 cm)
Fan Shelf 3RU 6 lb (2.7 kilos) 5.25 inches (13.4 cm)