Verilink AS2000: The Basics (880-502981-001) Product Manual - Manual (Page 15)

Access System 2000 Overview
Verilink Access System 2000: The Basics 1-5
Node Manager Node Manager is a PC program that supports a graphical user
interface (GUI) for managing all AS2000 nodes. The monitor
display shows the AS2000 shelf units with all modules in their
assigned slots. When a module is selected, a drawing of its CIM is
displayed. To configure a port, click on the desired port.
When used to manage ACP-based modules, Node Manager guides
the circuit-building process, and the database tracks all circuits
within the network.
Node Manager supports Simple Network Management Protocol
(SNMP), Advanced Communications Protocol (ACP), and Telemetry
Asynchronous Block Serial (TABS) node management protocols.
Figure 1-3 shows a Node Manager window.
Figure 1-3 Node Manager Window
SNMP The SCC 2020, SCC 2130, NCM 2000, QUAD 2164, HDM 2180, and
the HDM 2182 modules have embedded SNMP agents for use with
an SNMP Managment Program.
Depending on the module type, the communication link may be a
direct Ethernet connection at 10 Mbit/s or a SLIP connection at 9.6
kbit/s.
Management
Support Cross-
Reference
Figure 1-4 lists the various module types which may be used to
control a shelf or node of Verilink products. For each module
listed, the supported management option types are listed.