Teac DR-44WL Reference Manual - Manual (Page 50)

50
TASCAM DR-44WL
12 – Using Wi-Fi
3. Pop-up message on the display disappears and the DR-44WL
switches to a standby mode to connect to your smart phone.
4. In your Android device, select the “setting” w “Wi-Fi”.
5. When you turn the Wi-Fi on your Android terminal, a Wi-Fi
device SSID list appears. Select the SSID shown on the
display of the unit.
6. Wi-Fi connection is established between the DR-44WL and
your smart phone, and the Wi-Fi indicator of the unit will
light.
NOTE
The above description on operating the Android device
are for reference only. Please refer to your smart phone's
operation manual for more details.
Using a smart phone to remote control the
DR-44WL
The exclusive application (DR CONTROL) uses the same interface
of the DR-44WL, so the remote control operation is basically
the same as operating this unit. Familiarizing yourself with the
DR-44WL operation method will assist you in using the “DR
CONTROL” application.
1. When Wi-Fi connection is established between the DR-44WL
and your smart phone, tap the installed “DR CONTROL”
application.
2. When the “DR CONTROL” application is launched, the
following screen will appear on your smart phone to
remotely control the DR-44WL.
Detailed descriptions, on the “DR CONTROL” application,
including the “DR CONTROL reference manual", can be
downloaded from the TEAC Global Site (http://teac-global.
com).
File transfer from the DR-44WL to a smart
phone
1. Tap the “Browse” button on the “DR CONTROL” screen.
2. The “Browse” screen displays a list of files from the DR-44WL;
select the file you want to transfer.
3. Detail screen on the selected file will appear; tap the “Copy”
button.
4. A confirmation screen for file copy will appear; press the
“YES” button to start file transfer from the DR-44WL to your
smart phone.
Changing password
The password for Wi-Fi connection can be changed for security
purpose.
1. Press the MENU button to open the
MENU
screen.
2. Using the wheel, select (highlight) TOOLS and press the
ENTER/MARK or / button.
TOOLS
screen appears.
3. Using the wheel, select (highlight)
Wi-Fi
and press the
ENTER/MARK or / button.
Wi-Fi screen appears.
4. Using the wheel, select (highlight)
Wi-Fi
and press the
ENTER/MARK or / button.
5. Each time when you press the RECORD button, the
password will change.
6. Once the setting has been completed, press the 8/HOME
button to return to the Home screen.