Record in mtr mode, Manual track increment during recording, Automatic track increment at specified time – Teac DR-44WL Reference Manual User Manual
Page 23: Switch files during recording, Track increment, available in 4 ch mode only), 4 – recording
TASCAM DR-44WL
23
4 – Recording
Record in MTR mode
Sounds, etc. can be recorded over an already recorded file in
addition to the recording of up to four tracks.
Recorded files are saved as mono x 4.
1. Set the mode to
MTR
mode. (see “Selecting Operation
2. Select the track you want to record by using the TRACK/
INPUT button.
The track selected here goes into recording standby mode.
3. Press the RECORD button to start recording.
4. Press the 8/HOME button to stop recording.
Switch files during recording (track
increment, available in 4 CH mode
only)
During recording, you can stop recording to the current file
either manually or automatically at a set time, and continue to
record to a new file (the track increment function).
Manual track increment during recording
During recording, you can easily update a file manually and
continue to make recording.
1. Press the / button during recording.
NOTE
Numbers at the end of file name will increment each time
when a new file is created.
CAUTION
• The maximum total number of folders and files you can
create is 5,000.
• Files with a recording time of less than two seconds cannot
be created. Moreover, if the sampling frequency is 96 kHz,
files shorter than four seconds cannot be created.
• When the name of a new file to be created already exists,
the number will be incremented further.
Automatic track increment at specified time
During recording, the DR-44WL will automatically switch
recording from the current file to a new file when it reaches
a certain time specified in the
TRACK
INC
of the
AUTO
FUNCTION
screen.
Follow the below steps to set the maximum time for automatic
increment:
1. Press the MENU button to open the
MENU
screen.
2. Using the wheel, select (highlight)
AUTO
FUNCTION
and press the ENTER/MARK or / button.
AUTO
FUNCTION
screen is displayed.
3. Using the wheel, select (highlight)
TRACK
INC
and
press the ENTER/MARK or / button.
4. Use the wheel to select the automatic track increment time.
Options:
OFF
(default value),
5min
,
10min
,
15min
,
30min
,
60min
5. Once the setting has been completed, press the 8/HOME
button to return to the Home screen.
CAUTION
The maximum total number of folders and files you can
create is 5,000.