Teac DR-44WL Reference Manual - Manual (Page 27)

TASCAM DR-44WL
27
4 – Recording
Add cue marks automatically during
recording
When you turn the AUTO MARK function ON, cue marks can be
added automatically according to the operating level and time.
Add cue marks automatically according to set levels
1. Press the MENU button to open the
MENU screen.
2. Using the wheel, select (highlight)
AUTO FUNCTION
and press the ENTER/MARK or / button.
AUTO FUNCTION screen is displayed.
3. Using the wheel, select (highlight) MODE for AUTO
MARK and press the ENTER/MARK or / button.
4. Use the wheel to set the automatic cue mark mode to
LEVEL
.
Options: OFF (default value), LEVEL , TIME
5. Press the ENTER/MARK button to finalize the set mode.
6. Using the wheel, select (highlight)
LVL/TIME
for
AUTO MARK and press the ENTER/MARK or / button.
7. Use the wheel to set a level to automatically add cue marks.
Options:
-6dB
,
-12dB
(default value),
-24dB
,
-48dB
8. Press the ENTER/MARK button to finalize the set mode.
9. Once the setting has been completed, press the 8/HOME
button to return to the Home screen.
Add cue marks automatically according to set time
1. Press the MENU button to open the
MENU screen.
2. Using the wheel, select (highlight) AUTO FUNCTION
and press the ENTER/MARK or / button.
AUTO FUNCTION
screen is displayed.
3. Using the wheel, select (highlight)
MODE
for
AUTO
MARK
and press the ENTER/MARK or / button.
4. Use the wheel to set the automatic cue mark mode to
TIME .
5. Press the ENTER/MARK button to finalize the set mode.
6. Using the wheel, select (highlight) LVL/TIME for
AUTO MARK and press the ENTER/MARK or / button.
7. Use the wheel to set a time to automatically add cue marks.
Options: 5min , 10min , 15min , 30min , 60min
(default value)
8. Press the ENTER/MARK button to finalize the set time.
9. Once the setting has been completed, press the 8/HOME
button to return to the Home screen.
Moving to the cue mark position
During pause, you can move to a cue mark registered in the
selected file. When multiple cue marks exist, you will move to
the nearest cue mark to the present cue mark.
You can use this function to go to the beginning of a song,
similar to an index.
1. During pause or playback, while pressing the ENTER/MARK
button, press the . button or the / button.
NOTE
You cannot move to a cue mark of a different file.