Teac DR-44WL Reference Manual - Manual (Page 41)

TASCAM DR-44WL
41
8- QUICK Button Operation
Clearing track input (MTR mode only)
1. Set the mode to
MTR
mode. (see “Selecting Operation
Mode” on page 16)
2. Lord the song in which you want to delete tracks on the
SONG screen. (see “Loading Songs” on page 32)
3. While the Home screen is open when stopped, press QUICK
to show the QUICK menu screen.
4. Using the wheel, select (highlight)
TRACK CLEAR
and
press the ENTER/MARK or / button.
The screen for clearing tracks is popped up.
5. Use the wheel to select (highlight) tracks you want to clear
and press ENTER/MARK or the / button.
The following confirmation message will pop-up:
6. Press ENTER/MARK button to return to the Home screen
after deleting the selected tracks.
Press the 8/HOME button to return to the Home screen
without clearing tracks.
Track bounce
Use the track bounce (ping-pong recording) function to
combine recorded tracks 1 - 4 into one track.
This function allows you to record on tracks 1 - 2 after mixing
down tracks 1 - 4 (stereo bounce) or to record on track 1 by
mono mixing tracks 1 - 4 (mono bounce).
Track 1
Drum L
Track 3
Bass
(can be
overwritten)
Tracks 1–4 are mixed down to stereo
and bounced to tracks 1–2
Track 2
Drum R
Track 4
Guitar Track 3
Bass
Track 1 and 2
Drums, Bass,
Guitar
Track 4
Guitar
(can be
overwritten)
Track 1 and 2
Drums, Bass,
Guitar
Track 3
Lead
Guitar
Track 4
Lead
Vocal
New recordings can be
made to tracks 3–4
When recorded on the playback track itself, the original
playback track is naturally cleared (the drum part in Track 1 - 2 is
overwritten in the illustration above).
Bouncing tracks
1. Set the mode to
MTR
mode. (see “Selecting Operation
Mode” on page 16)
2. On the SONG screen, load songs in which you want to
bounce tracks. (see “Loading Songs” on page 32)
3. Press TRACK/INPUT for the track you want to use as bounce
destination and make TRACK/INPUT blink.
To apply stereo bounce by combining 1/2 track and 3/4
track, press two TRACK/INPUT.
For mono bounce (bouncing to a single track) , press any
one of TRACK/INPUT.
4. Press MIXER to open the Mixer screen and adjust
PAN
knob and the
LEVEL
knob for each track. (see “Setting the
mixer” on page 43)
For mono bounce to odd-numbered track, set the PAN
knob to L12 . For mono bounce to even-numbered track,
set the PAN knob to R12 .
Adjust the overall level with the master level knob.
5. When the Mixer screen is open, press MIXER to return to the
Home screen.
6. When playback is stopped or paused or when playing back,
press QUICK to open the QUICK pop-up menu.