Menu item list, 2 – names and functions of parts – Teac DR-44WL Reference Manual User Manual
Page 10
10
TASCAM DR-44WL
2 – Names and functions of parts
2
Reverb on/off status display
This icon shows the reverb on/off status.
Icon
Detail
Blank
Reverb is off
Reverb is on (sound effects recording)
Reverb is on (SEND status)
3
Phantom power supply display
Blank: No phantom power supply
: 48V phantom power supplied
: 24V phantom power supplied
4
Recording status message
The recording status is indicated in the following icons:
Indicator
Detail
09
Recording standby or recording pause
mode
0
In recording mode
Self-timer recording activated
5
Display of the setting status of the PRE REC or Auto REC
function (4CH mode only)
When the PRE REC function is
ON
, the
icon appears.
When the AUTO REC function is
ON
, the
icon appears.
6
Filename/song name display
Displays the file name automatically assigned to the
recording file.
When there are multiple files in the 4CH mode, only the
format portion of each of the file names and the basic
number of a recording file are displayed. When a single file is
recorded, its name is shown.
When the MTR mode is selected, the name of an opened
song is shown.
7
Level meter guide display
This is a level meter guide for adjusting the input and output
levels. It is displayed at the “-12 dB” position of the scale.
8
Level meter
Displays the input sound level.
The tg mark is given at the “-12 dB” position on the scale
as a guide mark for input level adjustment.
9
File status display
The file state is displayed in different ways, depending on
the type of a file to be recorded.
: Stereo file status
: Status of two mono files
0
Elapsed recording time
Displays the elapsed recording time of a recorded file (hours:
minutes: seconds).
q
Remaining recording time
The remaining time left on the SD card is shown in hours:
minutes: seconds.
w
Peak decibel (dB) message
Displays the peak input level in decibel reading.
Menu item list
Press the MENU button to open the
MENU
screen. Menu items
are as follows:
Menu item
Function
Ref. page
MODE
Switch the operation
mode of this unit.
REC SETTING
Make recording
settings
see page 17
see page 24
see page 25
see page 28
AUTO FUNCTION
Set different recording
functions.
see page 23
see page 24
see page 27
BROWSE
(4CH mode only)
SD card file and folder
operations
SONG
(MTR mode only)
Operate songs on the
card.
TOOLS
Configure settings for
different functions
see page 15
see page 44
see page 45
see page 50
REVERB
Configure reverb
settings.
POWER/DISPLAY
Set the power and the
display
SYSTEM
Various system
settings