11 – connecting with a computer, Transferring files to a computer, Transferring files from a computer – Teac DR-44WL Reference Manual User Manual
Page 47: Disconnecting the unit from a computer, See “11 – connecting with
TASCAM DR-44WL
47
11 – Connecting with a computer
By connecting this unit with a computer using the USB cable,
you can transfer audio files on the SD card in the unit to a
computer, as well as transfer audio files on the computer to the
SD card in the unit.
This unit can handle audio files of the following formats.
WAV : 44.1k/48k/96kHz, 16/24 bit
BWF : 44.1k/48k/96kHz, 16/24 bit
MP3 : 44.1k/48kHz, 32k/64k/96k/128k/192k/256k/320kbps
micro-B USB plug
Computer
USB
NOTE
• Instead of connecting the DR-44WL a computer via USB, you
can remove the SD card from the unit and insert directly (or
with a card adapter) to the computer and make the same
operation.
• Both WAV and BWF files will have the ”.wav” extension.
CAUTION
• The DR-44WL will not operate when
STORAGE
is
selected (highlighted) under USB connection.
• Please make a direct connection with the computer without
using a hub.
When you connect a USB cable while the unit power is on,
or turn on the power after making a connection, the
USB
SELECT
screen will pop up, prompting the user to select
either to operate the unit with USB bus power or make a USB
connection with the computer.
Use the wheel to select (highlight)
STORAGE
, and press
ENTER/MARK button to connect the unit with the computer.
The message of
USB
connected
appears.
Make sure that an SD card has been inserted properly into the
DR-44WL.
NOTE
Power is supplied from the USB port if the USB cable is
connected to the unit that contains batteries (USB bus
power prioritized).
If USB connection is made when the SD card is not inserted
correctly, a pop-up message of
Can't
Save
Data
will
appear.
When you open “computer”, DR-44WL appears on the computer
screen as an external drive with a volume label of “DR-44WL”.
Transferring files to a computer
1. When you click the “DR-44WL” drive on the computer screen,
the“MUSIC” and “UTILITY” folders will appear.
2. Open the “MUSIC” folder and drag & drop the file you want
to transfer to the desired location.
Transferring files from a computer
1. When you click the “DR-44WL” drive on the computer screen,
the“MUSIC” and “UTILITY” folders will appear.
2. Drag & drop the audio file from the computer to the “MUSIC”
folder.
TIPS
• You can manage the “MUSIC” folder on computer screen.
• You can create a sub-folder in the “MUSIC” folder. The
DR-44WL can create up to two layers. The DR-44WL cannot
recognize sub-folders and files located at the third layer
level or below.
• If you name sub-folders and music tracks, these names will
appear on the Home screen or
BROWSE
screen of this
unit.
Disconnecting the unit from a
computer
When disconnecting the DR-44WL from the computer, make
sure to follow the correct steps and remove the USB cable.
The power turns off after the unit completes its shutdown
(standby) process.
See the computer’s operation manual for instructions on how to
unmount an external volume.