Teac DR-44WL Reference Manual - Manual (Page 42)

42
TASCAM DR-44WL
8- QUICK Button Operation
7. Using the wheel, select (highlight) PLAY FUNCTION
and press ENTER/MARK button.
The
PLAY FUNCTION
screen is displayed.
8. Set the IN and OUT points of bounce as the loop playback
section. (see “Repeated Playback of Selection (Loop
Playback)” on page 36)
NOTE
When the IN/OUT points are not set, bounce from
00:00:00
to the final point of recording.
9. Press 8/HOME button to return to the Home screen, and
press QUICK to open the QUICK pop-up menu.
10. Using the wheel, select (highlight)
BOUNCE
and press the
ENTER/MARK or / button.
The following confirmation message will pop-up:
11. Press ENTER/MARK button to start track bounce and return
to the Home screen after bouncing.
Press the 8/HOME button to return to the Home screen
without track bouncing.
Confirming the results of bouncing
Lift the LEVEL knob for the track at the bounce destination
and the master level knob (set the LEVEL knob for other
tracks to minimum) to play back.
After bouncing tracks, tracks other than those bounced can be
newly recorded (overwritten).
TIPS
If it may be necessary to have the original track at a later
date, back up the song data on your computer before
bouncing (ping-pong recording). (see “11 – Connecting with
a computer” on page 47)
Mixing down
This function is used to merge multiple files into two right and
left channels (one file).
Adjustments of the effect level (
SEND
), right and left positions
( PAN ), volume balance ( LEVEL ) can be freely set on the
MIXER screen. (see “Setting the mixer” on page 43)
1. Use the .// button to select file you want to mix
down on the BROWSE screen for 4CH operation mode
or on the SONG screen for MTR operation mode. (see
“Selecting Operation Mode” on page 16)
2. While the Home screen is open when stopped or paused,
press QUICK to open the Quick menu screen.
3. Using the wheel, select (highlight) MIXDOWN and press
the ENTER/MARK button.
The following confirmation message will pop-up:
Popup display in 4CH mode
4. Press ENTER/MARK button to start mixing down return to
the Home screen after mixing down.
Press the 8/HOME button to return to the Home screen
without mixing down files.
5. After completing the above process, the playback screen for
the second file that has been mixed down (the last incre-
mented number before mixing down).
In this state, press the 7/9 button to playback the mixed
down file.