Sundance SMT943 - Manual (Page 54)

User Manual SMT943 Page 54 of 54 Last Edited: 23/08/2011 17:24:00
6 Physical Properties
Dimensions 63.5mm x 106.7mm x 18mm
Weight 40 grams
Supply Voltages
Supply Current +12V N/A
+5V tbd
+3.3V tbd
-5V N/A
-12V N/A
MTBF tbd
7 Safety
This module presents no hazard to the user when in normal use.
8 Ordering Information
SMT943 (Standard Product): ADC inputs and DAC outputs are AC-coupled. Note
that the board must be mated with a 2.5-V IO SLB module.
The board is provided with an SMT593, which is a loopback PCB to route DAC
outputs to ADC inputs. It clips onto J15/J16/J1015/J1016.
Figure 19 - SMT593 Loopback pcb.
9 EMC
This module is designed to operate from within an enclosed host system, which is
build to provide EMC shielding. Operation within the EU EMC guidelines is not
guaranteed unless it is installed within an adequate host system.
This module is protected from damage by fast voltage transients originating from
outside the host system which may be introduced through the output cables.
Short circuiting any output to ground does not cause the host PC system to lock up
or reboot.