Sundance SMT943 - Manual (Page 36)

User Manual SMT943 Page 36 of 54 Last Edited: 23/08/2011 17:24:00
2 ‘1001’ Output buffers disabled for channelB.
3 ‘1010’ Output buffers disabled for channelA.
4 ‘1011’ Output buffers disabled for channelA and B.
5 ‘1100’ Global power down.
6 ‘1101’ ChannelB in standby.
7 ‘1110’ ChannelA in standby.
ADC Chab Register 2 0x32.
ADC Chab Register 2 0x32
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 LVDS_CM
OS
Reserved
Default ’0’ ‘0000000’
1 Clock Edge Control (rising edge) Clock Edge Control (falling edge) Reserved
Default ‘000’ ‘000’ ‘00’
ADC Chab Register 2 0x32
Setting Bit 7 Description LVDS_CMOS
0 ‘0’ Parallel CMOS interface.
1 ‘1’ DDR LVDS interface.
Setting Bit 12:10 Description Clock output Edge control (falling edge)
0 ‘000’,’100’ Default output clock position.
1 ‘101’ Falling edge shifted by +(4/26)/Sampling Frequency
2 ‘110’ Falling edge shifted by -(6/26)/Sampling Frequency
3 ‘111’ Falling edge shifted by -(4/26)/Sampling Frequency
Setting Bit 15:13 Description Clock output Edge control (rising edge)
0 ‘000’,’100’ Default output clock position.
1 ‘101’ Rising edge shifted by +(4/26)/Sampling Frequency
2 ‘110’ Rising edge shifted by -(6/26)/Sampling Frequency
3 ‘111’ Rising edge shifted by -(4/26)/Sampling Frequency
ADC Chab Register 3 0x33.
ADC Chab Register 3 0x33
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 Reserved Channel
Control
Reserved Data Format Reserved
Default ’0’ ‘0’ ‘000’ ‘00’ ‘0’
1 Custom Pattern (lsb)
Default ‘00000000’