11 clock, 12 alarm management, Clock alarm management – RLE LD2000 User Manual
Page 47: Table 4.8, Alarm management menu options

www.rletech.com
47
970.484.6510
4
Web Interface
4.3.11 Clock
The Clock Configuration page allows users to set the date and time on the LD2000's internal
clock.
Enter the date using a MM/DD/YY format, where MM is a two digit month, DD is a two
digit day, and YY is a two digit year.
Enter the time using a HH/MM/SS format, where HH is a two digit hour (1-24), MM is a
two digit minute (1-60), and SS is a two digit second (1-60).
Figure 4.17 Clock Configuration Page
4.3.12 Alarm Management
The Alarm Management page allows users to acknowledge, reset, and clear alarms.
Figure 4.18 Alarm Management Configuration
Table 4.8 Alarm Management Menu Options
Alarm Management
Menu Options
Description
Acknowledge SNMP
Informs
Acknowledges SNMP Informs and ceases Informs from being sent
out for the current alarm condition.
Reset Leak Alarm
Resets the current leak alarm and causes the unit to recheck the
current cable conditions. This will clear the alarm condition if the
cable registers that the leak threshold is within an accepted range.
Clear Alarm History
Clears the alarm history table of all previous alarms.