RLE LD2000 - Manual (Page 38)

www.rletech.com 38 970.484.6510
4 Web Interface
4.3.6 Email/DNS
The Email page allows users to configure the LD2000 to send notification via email when the
unit is in an alarm state. The LD2000 will send one email message per alarm instance to a
maximum of four email recipients.
Table 4.3 Email Menu Options
Email Menu Options Description
Access Type Specifies whether to send the message through a local network
connection or disable the email feature (none).
Email
Contamination
Alarms
Specifies whether to send email alarm notification upon a cable
contamination alarm. Users may want to disable this feature if false
alarms are often detected.
DNS Servers Information provided by your ISP; needed to deliver the email
message.
Mail (SMTP) Server Specifies the email server used to receive and send mail.
Mail Sender Address The address displayed in the “From” field of the email message.
Mail Subject Displayed in the subject field of the received email messages.
Mail Recipient (1) -
Mail Recipient (4)
Enter the addresses of up to four email recipients.
SMTP
Authentication
Used for ESMTP; use the recommended default setting unless
instructed differently by your IT Department.
SMTP User Name Used for ESMTP; use the recommended default setting unless
instructed differently by your IT Department.
SMTP Password Used for ESMTP; use the recommended default setting unless
instructed differently by your IT Department.