RLE LD2000 - Manual (Page 35)

www.rletech.com 35 970.484.6510
4 Web Interface
4.3.2 Zone Configuration
Figure 4.7 Zone Configuration
Figure 4.8 Link Configuration Page
Table 4.2 Zone Configuration Menu Settings
Zone
Configurations
Settings Description
Zones 1- 8 Allows users to set zones to be virtual or physical points. Virtual is
used for labeling reference points along the leak detection cable
length. Physical is for when using the LD2000 as a Leak Detection
Modbus master. Physical points are described in Appendix B.
Modbus Zone Traps You can enable or disable SNMP traps for the Leak Detection
Modbus master.
Enable Alarm Relay
for Modbus Slaves
The summary alarm can also be activated when a Leak Detection
slave unit goes into an alarm.
Zone Links There is a link for a reference map to the LD2000. A link has been
provided for every potential slave unit that may be attached.