8 snmp/syslog, Snmp/syslog, Table 4.5 – RLE LD2000 User Manual
Page 41: Snmp/syslog menu options

www.rletech.com
41
970.484.6510
4
Web Interface
4.3.8 SNMP/Syslog
SNMP/Syslog allows users to configure SNMP notification options.
Table 4.5 SNMP/Syslog Menu Options
SNMP/Syslog Menu
Options
Description
System Name
Appears on the LD2000 Main Menu and is included as part of email
notifications.
System Contact
Lists the individual responsible for the LD2000. The System
Contact is only available through SNMP Gets and is not included in
email or SNMP Trap notifications.
System Location
Lists the location of the LD2000. The System Location is not
included in email or SNMP Trap notifications.
Select SNMP Trap
Type
Choose from three trap types:
V1-Trap
V2C-Trap
V2C-Inform
Max Inform Retries
The number of times the LD2000 will retry an Inform operation
when the original Inform is unacknowledged.
Inform Interval
The amount of time, in minutes, between Inform operations.
V1/V2C Community
Names
The community name of the manager.
Trap Communities
Identifies devices that receive SNMP Traps and/or Syslog
messages from the LD2000 and interacts with the LD2000 over the
network. To add a device to the Communities list, select a
community number posted as “empty.” Enter the receiving device's
IP Address and a string that identifies the device. An IP Address of
0.0.0.0 in this field allows any device to access the LD2000 through
an MIB browser. Select “Write” if the device will have Read/Write
network access. This allows the LD2000 to be configured over the
network. Select “Trap” if the device will receive Traps from the
LD2000. Select “Syslog Messages” if the device will receive Syslog
messages from the LD2000.