REMKO HTS 90 ALU - Manual (Page 13)

Series HTS 200 HTS 260
Usable limits, heating °C -20 - +45
Service limits, cooling °C +15 - +45
Refrigerant / pre-charge quantity indoor module -- / kg R 410A 2) / 5.40
Refrigerant / pre-charge quantity
for more than 7 m length of ordinary pipe
g / m 60
Refrigerant connections on outdoor module Inches (mm) 3/8" (9.52) / 5/8" (15.9)
Refrigerant connections on indoor module Inches (mm) 1/2" (12.70) / 3/4" (19.05)
Refrigerant piping length, total
(simple length)
m 25 25
Refrigerant piping height, max. m 15 15
Power supply indoor module V / Ph / Hz 400V /3 Ph/ 50Hz
Power supply to indoor module control unit V / Ph / Hz 230V /1 Ph/50Hz
Power supply to electrical heating coil V / Ph / Hz 400V /3 Ph/ 50Hz
Max. current consumption A 10.2 14.4
Rated current consumption for A7/W35 A 5.12 8.11
Rated power consumption for A7/W35 kW 3.10 4.15
Rated power consumption for A2/W35 kW 3,07 4,56
Max. power consumption kW 6.39 8.45
Power factor at A7/W35 (cosφ) -- 0.8 0.8
Customer's fuse protection indoor module
A slow-
acting
3 x 16 3 x 20
Rated water flow (according to EN 14511, at ∆t 5 K) m³/hr 2.6 3.5
Pressure loss on condenser at rated volumetric flow rate bar 0.21 0.23
Pressure loss, outdoor kPa 80
Airflow volume outdoor module m³/hr 5,000 5400
Max. operating pressure, water bar 3
Hydraulic connection, supply / return Inches 1 1/4" AG
Recommended pipe dimension Cu copper mm 35 42
Water volume, indoor module l 5.3 5.3
Refrigerant oil Type Synthetic Oil FV50S
Rated power intake of indoor module pump, min./max. W 7 / 136
Rated input power of each outdoor module fan W 115 125
Rated power intake of indoor module pump, min./max. A 0.07 / 1.03
Volumetric flow rate of indoor module pump, min./max. m³/hr 0.9/2.8 0.9/3.5
Motor protection, indoor module pump -- Resistant to blocking current
13